Textile Testing Equipments

Product Details:

HTHP Beaker Dyeing Machine 12 Pot:

Having 12 pot of 250 ml, Inner chamber and outer body complete in S.S. with digital temperature indictor cum controller, cooling arrangement and reverse forward motion to maintain uniformity inside the jar.

HTHP Beaker Dyeing Machine 8 Pot:

Having 8 pot of 250 ml and 1 pot of 5 Ltr’s, Inner chamber and outer body complete in S.S. with digital temperature indictor cum controller, cooling arrangement and reverse forward motion to maintain uniformity inside the jar.

Product Details:

With Digital Display of Bursting Strength and backlit LCD display with pneumatic clamping of sample, Microprocessor based model logical detection of sample failure with auto stop and auto return on sample failure confirming to TAPPI standard T - 807 & 810.

Product Details:

Martindale Abrasion Tester

Determination of resistance of any fabric to abrasion is usually carried out by abrading the fabric under specified conditions against a standard abrading. Although plane abrasion of fabric surface does not cover all aspects of strains that are important in determining service life, there are occasions when such a test gives useful information. With 4 nos circular abrasion tables circular specimen of fabric are abraded under known pressure under a motion which is the resultant of too simple harmonic motion at right angle to each other the resistance of abrasion is estimated by visual appearance or by finding the loss in mass of the specimen.

Related Standard

IS 12673 –1989 :Textile Fabrics – Abrasion Resistance – Methods for Determination

BS Handbook1: Method of test for abrasion Resistance of fabrics.

BS EN 344:1992: Requirement and test methods for safety, protective and occupational footwear for professional use.

IS 15298 (Part – 1) : 2002 , ISO: 8782 – 1 : 1998

Product Details:

To determine the pilling and fuzzing characteristics of textile fabric.

Stainless steel impellers rotate within individually lit aluminum

chamber constantly tumbling test fabrics against cork liners for pre- determined time controlled by a timer and audible alarm.

Product Details:

a) HOT AIR OVEN

Universal memmert type, inner chamber of aluminum and outer body of M.S. duly painted with enamel paint of size 18” x 18”x 18” with air circulating Fan Thermometer and Thermostat.

b) DIGITAL HOT AIR OVEN:-

With double wall, single door and inner chamber complete in SS, outer body of M.S., duly powdered coated. Air circulating fan for uniform air circulation inside the chamber, having the following technical data:

Technical Data

1. Working width of the inner chamber – 18” x 18” x 18”

2. Display of temperature – Digital Display of Temperature.

3. Temperature range – 250⁰C

4. Temperature Accuracy – 3⁰C

5. Total Electrical Load – 1.5 KW

6. No. of Air Circulating Fan – 1 No.

7. Insulation – 3” thick mineral wool from all sides

8. Power Supply – Single Phase

No. of Shelves – 2 Nos

Additional Information:

• Delivery Time: within a week

Product Details:

Martindale Abrasion Tester

Determination of resistance of any fabric to abrasion is usually carried out by abrading the fabric under specified conditions against a standard abrading. Although plane abrasion of fabric surface does not cover all aspects of strains that are important in determining service life, there are occasions when such a test gives useful information. With 4 nos circular abrasion tables circular specimen of fabric are abraded under known pressure under a motion which is the resultant of too simple harmonic motion at right angle to each other the resistance of abrasion is estimated by visual appearance or by finding the loss in mass of the specimen.

Related Standard

IS 12673 –1989 :Textile Fabrics – Abrasion Resistance – Methods for Determination

BS Handbook1: Method of test for abrasion Resistance of fabrics.

BS EN 344:1992: Requirement and test methods for safety, protective and occupational footwear for professional use.

IS 15298 (Part – 1) : 2002 , ISO: 8782 – 1 : 1998

Product Details:

Martindale Abrasion Tester

Determination of resistance of any fabric to abrasion is usually carried out by abrading the fabric under specified conditions against a standard abrading. Although plane abrasion of fabric surface does not cover all aspects of strains that are important in determining service life, there are occasions when such a test gives useful information. With 4 nos circular abrasion tables circular specimen of fabric are abraded under known pressure under a motion which is the resultant of too simple harmonic motion at right angle to each other the resistance of abrasion is estimated by visual appearance or by finding the loss in mass of the specimen.

Related Standard

IS 12673 –1989 :Textile Fabrics – Abrasion Resistance – Methods for Determination

BS Handbook1: Method of test for abrasion Resistance of fabrics.

BS EN 344:1992: Requirement and test methods for safety, protective and occupational footwear for professional use.

IS 15298 (Part – 1) : 2002 , ISO: 8782 – 1 : 1998

Product Details:

Color Matching Cabinet provides standardized and controlled The machine is used for dyeing of sample for polyester, environment for visual assessment of colors. It is suitable for cotton and any form of fiber or blended yarn and fabric.

Additional Information:

• Delivery Time: 10-12 days
• Packaging Details: wooding packaging through tci

Product Details:

Rota Dyer is an ideal machine for carrying out dying trials under atmospheric conditions for cotton yarn, fabric, and blended fabric, yarn or fiber etc. Machine works on a principal of continuous moving of material as well as liquor and ideally suited for dying a sample up to 1000C +_ 50C.

Product Details:

With Digital Display of Tearing Strength and backlit LCD display with pneumatic clamping of sample, Microprocessor based model logical detection

Product Details:

To measure the tpm/tpi of single double and multifilament yarn. the instrument has the facility of both twist/untwist method of measurement of tpm/tpi it's a motorized uni and gives the tpm/tpi values directly respective of any test length of the yarn. digital display of yarn testing length specime

no., type of twist s/z, operating mode, counter reset key, motor adjustment knob and storage

of 20 readings of tom/tpi and average value.

Product Details:

Digital Pilling Tester :

• With digital preset counter for number of revolution, test template, mounting device and 8 nos. Rubber tubes for pilling, Scissor and standard photographs in the standard supply.

Random Digital Pilling Tester :

• To determine the pilling and fuzzing characteristics of textile fabric. Stainless steel impellers rotate within individually lit aluminum chamber constantly tumbling test fabrics against cork liners for pre- determined Time controlled by a timer and audible alarm. Compressed air is injected into the chamber to assist in the tumbling action having four test Chambers.

Product Details:

We are prominent manufactures, suppliers and exporters of an extensive range of Laboratory Testing Instruments, Fabric Testing Instruments, Yarn Testing Equipments, Leather testing equipments, Safety Shoe Testing Equipments and Helmet Testing Equipments. 

Product Details:

The equipment is used to determine the color Fastness of textile material perspective of any compositions for example cotton, Nylon, Linen, Silk, Wool, Yarn or fiber etc. By way of mechanical hesitation of textile in contact with the piece of specified adjacent fabrics in a soap soda solution followed by rinsing and drying.

Product Details:

We are prominent manufactures, suppliers and exporters of an extensive range of Laboratory Testing Instruments, Fabric Testing Instruments, Yarn Testing Equipments, Leather testing equipments, Safety Shoe Testing Equipments and Helmet Testing Equipments. 

Product Details:

Vertical tensile testing machine having capacity of 250Kg with following scope of supply:

 

Specifications:

·         Type of Construction: Load frame supported on a base plate with legs support.

·         Force Rating: 250Kg.

·         Grip to Grip separation: Min 25mm and Max. 700mm

·         Day light distance: Approx 750 mm between base plate and upper cross head.

·         Display : Digital Display

·         Peak hold facility available.

·         Displacement Resolution 0.1

·         Accuracy : 0.5 %

·         Fixed Speed of traverse as per the customer’s requirement.

 

Grips and fixtures:

·         1 set of Grips, suitable for testing of flat specimen.

·         Precise holding to prevent pre mature wear and tear while holding the specimen.

 

Product Details:

Digital Conditioning Chamber

With Double wall, Double door inner chamber of SS and Outer body of MS duly Powder coated.Digital Display of temperature and relative humidity with digital temperature cum humidity controller cum indicator having the following technical data.

Technical Data

Size of the Inner Chamber : 18” X 18” X 28”

Display of temperature : Digital Display of Temperature & humidity.

Temp Range : Ambient to 60⁰ C

Accuracy : + 1⁰C

RH Range : Ambient to 95%

Accuracy : + 5%

Display : Digital display of Temp. And RH through digital Indicator cum controller with cooling and heating arrangement.

Product Details:

We are prominent manufactures, suppliers and exporters of an extensive range of Laboratory Testing Instruments, Fabric Testing Instruments, Yarn Testing Equipments, Leather testing equipments, Safety Shoe Testing Equipments and Helmet Testing Equipments. 

Product Details:

Tensile Strength and elongation are the two prime characteristics of most of the raw materials, whether they are metals; or non-metals such as rubber, leather, textiles, plastic paper; or finished products such as rods, wires, ropes, yarns belts etc. These properties very often play the major role in determining the suitability of any raw material for any specific applications.

Product Details:

Being a well established organization, we bring forth an excellent quality Digital Light Fastness Tester that is extensively demanded in textile industry. The equipment provided by us is highly appreciated by our prestigious clients owing to its long service life and excellent functioning. Our offered equipment is made available in enormous models and various technical specifications for our clients to choose from. ThisDigital Light Fastness Tester is manufactured under the stern guidance of our diligent professionals by utilizing quality approved components and advanced technology.

Features:

• Low maintenance
• Trouble-free operation
• Anti-corrosive body
• High functionality

Product Details:

• To find out the GSM Hydraulic Cutter fabrics along with 4 Nos. Imported blades and two numbers rubber pads to give a cut piece of 1/100th part of a square mtr area with locking arrangement for safety.

Product Details:

he equipment is used to determine the color Fastness of textile material perspective of any compositions for example cotton, Nylon, Linen, Silk, Wool, Yarn or fiber etc. By way of mechanical hesitation of textile in contact with the piece of specified adjacent fabrics in a soap soda solution followed by rinsing and drying.